[saifou]

plate centring problem

[saifou]

作者: 小睡片刻

现在还在用这款机器的厂家要么是土豪厂，要么是两报一刊定点印刷厂。

machine made by FFEI ,low cost ver of Fuji V8 mono laser ,good machine

[saifou]

作者: 小睡片刻

紫激光光敏机，机器本身没什么毛病，但问题是版材贵啊，而且冲版需要预加热，冲机出故障的机率不小。现在大部分人家把这款机器卖掉了。

yes you are right but trendsetter ou suprasetter laser more expensive at end of life compared to violet box , some newpaper continue using violet for speed P/h , preheat is not problem exept extra energy cost , this machine is simple and easy to fix and have lower down time then thermal , price of laser and clamps more expensiv then complit violet ctp

[saifou]

作者: 小睡片刻

用这款机器的，对冲机都恨得要死。因为加热瓦在5年之后就会频繁的坏掉，换起来非常麻烦。

this is related processor problem not CTP so u can change infrared element

[saifou]

作者: 山竹

感觉您对这款机器很熟悉，请教一个问题：如果棱镜边缘有斑驳的损伤，一定会影响出版质量吗？除了换件还有什么修复的办法？谢谢

can i have a photo ou spinner miror to judge ? , this machie is mono beam so less affected then dual beam , if mirror damaged the spinner must be changed ou of if u know wher you can repair the mirror surface there is chance

[saifou]

作者: 山竹

谢了，不过我们没有修复镜面的渠道……。

share spinner mirror photo here

[saifou]

作者: 山竹

大家看看这还能用吗？

this mirror in not good but is usable and just adjust laser power , the mono beam machine use the central part of mirror so u can continue use it ,

[saifou]

作者: 尝试改变

这几年紫激光机器淘汰得让人心疼，还在使用紫激光机器的厂家，那是真爱。这款机器真的非常好，简单，稳定，几乎无故障，人机接口相当简单清晰。遗憾的是要在黄色灯光下使用。现在铝价大涨，版材价格应该不是问题了

you are right the problem widh this machine is the process is more complex then thermal machine ,plate more expancive , no process less plate exept azura VI from Agfa and Pro V from Fujifilm but the price is to hight