| 论坛帮助 |
| 日历事件 |
2018-06-11, 23:19
|
#1 | ||
|
|||
|
见习会员
等级: 小兄弟
|
 求大神知道 另求大神知道如何入门修机子…… |
||
|
| 右列会员因为此帖价值甚高向 mgjc189 表示感谢: |
luoxinxjie (2018-12-02)
|
|
2018-06-12, 09:28
|
只看该作者 #2 | |||
|
||||
|
正嘉数码●施乐正品
等级: 八袋长老
|
那么还是要先检查定影器 是否没有连接好 或者 没有安装到位
__________________
声 明 如 下： 海贼唯一Q号:1300298000[V信同号]，Q群:116774； TEL:15565218000 [V信同号]; [抖音号:zenjusthaizei(V信同号)]; TaoBao:正品施乐耗材旗舰店 ←请点击 1,我司专营富士2手设备耗材,及其他品牌(柯美,惠普,佳能等)各机型耗材配件; 2,修设备,做技术,俺靠一句话"人可以骗人,但是设备不会骗人." 3,认为本人技术分享有用的,请点击右下角“感谢”赞一个,或扫码下图微信打赏.谢谢。  |
|||
|
|
|
2018-06-12, 12:04
|
只看该作者 #3 | ||
|
|||
|
正式会员
等级: 七袋长老
|
Bsd-on:CH10.1 Nip or Release operation error of the Fusing Unit was detected. This Fail is a Sub System failure and its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7) Cause/Action Check the following: The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6) The Sensor Actuator for damage. (PL 7.6) The Gear of retract mechanism for wear and damage. The One Way Clutch for skidding. The Drawer Connector ( DP612/ DJ612) for poor contact. If no problem is found, replace the MCU PWB. (PL 18.2) 010-321 Fusing Unit Nip Fail Bsd-on:CH10.1 Nip or Release operation error of the Fusing Unit was detected. This Fail is a Sub System failure and its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7) Cause/Action Check the following: The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6) The Sensor Actuator for damage. (PL 7.6) The Gear of retract mechanism for wear and damage. The One Way Clutch for skidding. The Drawer Connector ( DP612/ DJ612) for poor contact. If no problem is found, replace the MCU PWB. (PL 18.2) 此帖于 2018-06-13 09:25 被 修施乐的海贼 编辑. |
||
|
|
施乐j75 定影器换完加热膜和压辊 报010-321求路过的大神指点下
