| 论坛帮助 |
| 日历事件 |
|
|
只看该作者 #4 | |||
|
||||
|
荣誉版主
等级: 七袋长老
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
__________________
CTP综合讨论区欢迎你的参与! =========================================================================
|
|||
|
|
|
|
只看该作者 #7 | |||
|
||||
|
荣誉版主
等级: 七袋长老
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Magnus VLF:40729 Error Message: MDH: Drum vacuum timeout: Failed to achieve vacuum threshold (<Threshold>) within <Timeout> ms (only reached <ActualValue>). [<I/O name>] Service Information: A timeout occurred while waiting for the drum vacuum to cross the threshold. The vacuum level can be checked with the <<drum vac>> command. The threshold is set with the "mhauto DrumVacThresh" parameter. A command will eventually exist to help with threshold calibration. It is possible to bypass the sensor temporarily with the <<scan>> command. Cause: (原因): The drum vacuum sensor did not reach the expected threshold (转鼓真空传感器并没有达到预期的阈值) Incorrect threshold value (阈值不正确) Parameter: Threshold - This is the threshold value that was not reached. Timeout - This is the amount of time allowed to reach the threshold. ActualValue - This is the actual value reached after the timeout. I/O name - This is the standard firmware name of the sensor.
__________________
河南印前拼版CTP群QQ2560198 欢迎大家加入! |
|||
|
|
| 右列会员因为此帖价值甚高向 wjzoufeng 表示感谢: |
飞翔工作室 (2013-06-26)
|